Windows ICS

Windows ICS configuration for PPG

Windows ICS (Internet Connection Sharing) can be easily configured to support your Personal Phone Gateway (PPG).

There are two options when installing your PPG on the network with Windows ICS.

Install the PPG card and application on the PC that is running ICS and is directly connected to the Internet. This option does not require any configuration.

Install the PPG and application on a PC that is part of the network. Instructions are below.

Before installation of your Personal Phone Gateway (PPG)

Your PC running Windows ICS is sharing your Internet connection to all of your PCs.

After installation of your Personal Phone Gateway (PPG)

Simply install the PPG application on the PC that is running Windows ICS and drop in the PPG PCI card.

You can continue to use the PC normally as your PPG will have no effect on the normal operation of your PC.

Configuration when the PPG card is not in the PC running ICS

If you would prefer to install your PPG card in a PC on your network (not in the PC running ICS) please follow the instructions below. Please note that these instructions are for ICS running on a Windows 2000 or Windows XP PC.

On the PC running ICS.

Open your local area connection properties.

Click the settings button.

Click the Services tab.

Click Add

In the Name of service box enter "IRC service”.

In the Service port number box enter "6667".

Check "TCP"

In the "Name or address" box enter the name or I.P. address of the PC with the PPG card.

Repeat this procedure for the port 6666 UDP

Repeat this procedure for the "NetMeeting" service and port 1720

Next . . .

You are now all set to place calls through your Personal Phone Gateway (PPG).