|
     |
|
|
|
|
|
|
Common Skype related setup
problems, Click here
Use our USB Phone and
RJ11 phone adaptor with Skype
Our
USB Phone and
RJ11 to USB adaptor
fully support Skype including the
ring function for
incoming calls.
Designed and optimized to provide the
best possible internet telephone experience, our
USB Phone
can answer/receive/hang-up
Skype's calls by a simple click of the
built-in hotkeys without using your computer's keyboard or mouse.
When using
USB to
RJ11 Phone adaptor ,you can use your choice
of any regular phone ( including
cordless phones)
to place/receive/hang-up Skype calls without using your computer's
keyboard or mouse.
To setup USB
Phone, RJ11 Phone adaptor to work with Skype
1) Run your IP Phone Center (
For Skype ver.2.0, need to use
Ver.823 or up)
2) Setup your Skype Access
control. Click here for
instruction
3) Make Skype address bar is
open. Click here for
instruction
4) Run your Skype and follow below
instruction to enjoy the convenient features with our hardware
- Instruction to use RJ11 adaptor with
Skype, click here
- Instruction to use USB Phone with
Skype, click here
|
How to
use USB Flash Phone with Skype |
|
- The phone will ring, when
you have an incoming call
- To answer the call, push
Green call button
- To hang-up the call, push
Red hang-up button
- To make a call, select
contact then push
Green call button
- To Speed dial, Push
Side button to bring up Skype focus. Dial the
pre-set speed dial
number, then push Green call button
- To delete, push
Red delete button
- To Skype out, dial *
then follow the phone numbers, then push Green call button
- To Listen voice mail, dial
#7. Dial #9 to call back last miss skype call
Note: To set Skype pre-set speed
dial number: In Skype's contact list, right click contact name then
assign speed dial number
Make sure
ViewAddressBar is
open in your Skype |
 |
How to
use RJ11 adaptor with Skype |
- The phone will ring, when
you have an incoming call
- To answer the call, Pick up
the hand set
- To hang-up the call, Hang-up
the hand set
- To make a call, select
contact then dial #1
- To Speed dial, Pick up hand
set and dial pre-set speed dial number,
then dial "#" "#"
- To delete, Dial "#" "0"
- To Skype out, dial *
or 00 then follow the phone numbers, then enter "#""#"
- Accept/Make call, dial #1
- Move cursor up: dial #2
- Reject/Hang-up call, dial #3
- Select Dialpad page [Skype
1.4 or later], dial #4
- Select Contacts page, dial
#5
- Select History page [Skype
1.4 or later], dial #6
- Listen Voicemail
[Skype 1.4 or later], dial #7
- Move cursor down, dial #8
- Instant callback, dial
#9
- Backspace, dial #0
- Enter, dial ##
Note: To set Skype pre-set
speed dial number: In Skype's contact list, right click contact name
then assign speed dial number Make
sure ViewAddressBar
is open in your Skype |
 |
|
Order |
|
|
|
|
|
|
|
|
|
|
