USB PPG + RJ11 phone adaptor installation procedure

 

Important!  Install your CD first then plug in your hardware

 

  • USB PPG + RJ11 phone adaptor hardware is same as RJ11_Combo but comes with two serial numbers ( IP Phone Center and USB PPG serial number)

  • Make sure you use different email ID for IP Phone Center and PPG

  • Reboot your PC

  • Insert IP Phone Center CD into your CD drive

  • CD will auto run

  • Follow on screen instruction to install software

  • After installation, reboot your PC

  • After you install the software , follow below diagram to connect your hardware

 
 
 

After you plug the USB cable from your hardware into your PC , follow this link for the instruction to complete the installation

Quick notes: to use RJ11 phone adaptor-Combo / USB PPG+ RJ11

LED signal:

  • Line LED on: Indicates your phone is connected to PSTN telephone line
  • VoIP  LED on: Indicates your phone is connected to PC for VoIP call
  • Both Line and VoIP LED on:  Indicates PPG is enable and forwarding a call to PSTN line

Toggle the connection:

  • To switch the phone connection from VoIP to Line , Enter ( * # * )
  • To switch the phone connection from Line to VoIP, Enter (* # * ) or Flash hook (hang-up shortly)

Answer regular Line or VoIP call:

  • When you have PSTN incoming call, IPC will automatic select PSTN line
  • When you have Skype incoming call, IPC will automatic select VoIP
  • When you Pick up the phone, it will connect to VoIP. If you want to switch to PSTN line, just dial ( * # * )
  • When you are in Skype call, will hear a warning tone if you have  PSTN call ringing. You can dial ( * # *)  switch to answer PSTN call and keep Skype call on hold
  • When you are in regular phone call and like to answer Skype incoming call, enter ( * # * ) or Flash hook ( hang-up shortly) to switch to VoIP then enter ## to answer Skype call.

To make SkypeOut call:

  • For Skype speed dial, dial "speed dial number" then ##
  • For SkypeOut, dial 00 then phone number then ##

Setup Skypeforward and SkypeAnswer function:

  1. Click IP Phone Center's Tools > "Forward/Answer PSTN setting".
  2. To enable "SkypeForward" function, check "enable outgoing PSTN" , enter phone number.
  3. To enable "SkypeAnswer" function, check "Answer incoming PSTN", enter Skype name or Speed dial number.

"Setup 3 ways conference:

  1. Establish Skype call
  2. Click the conference button on IP Phone Center to toggle connection to PSTN line
  3. Establish regular line call and start 3 ways conference.

Tips to use the phone keypad

  • To delete, Dial "#" "0"
  • To Skype out, dial * or 00 then follow the phone numbers, then enter "#""#"
  • Accept/Make call, dial #1
  • Move cursor up: dial #2
  • Reject/Hang-up call, dial #3
  • Select Dialpad page [Skype 1.4 or later], dial #4
  • Select Contacts page, dial #5
  • Select History page [Skype 1.4 or later], dial #6
  •  Listen Voicemail [Skype 1.4 or later], dial #7
  • Move cursor down, dial #8
  •  Instant callback, dial #9
  •  Switch between multiple Skype calls, dial #9
  • Backspace, dial #0
  • Conference, dial #*
  • Enter, dial ##
  • Toggle connection between Regular Lin and VoIP, dial * # * or Flash hook ( hang-up shortly) to switch from Line to VoIP
  • New feature: Make Skype call from your Phone's history list:  Select the Skype ID from your phone's caller history list and make call.
  • New feature: Upload Skype contact list to your phone's history list:  Right Click IPC icon and click "Upload skype phone book".

 

 

For advance user feature: Click here

 

 

 

Click here for Support